Call 08048077799 88% Response Rate

our range

Air Blow Guns

Many low cost air guns are sold extensively throughout the world but do not necessarily last. In addition they are not all safe to use and may result in dangerous high dead end pressures.

 

Safety Air Guns are durable, safe and comfortable to use incorporating our efficient air nozzles and air jets to produce high output air and "laminar" flow while minimizing compressed air use and noise levels.

 

The most important reason to use Safety Guns with our air jets and air nozzles is safety. All Air Jets and Nozzles meet OSHA standard CFR 1910.242(b) for dead end pressure. Noise levels are dramatically lower with air nozzles and air jets in addition to lower energy use.

 

There are two types of Safety Air Guns to choose from depending on an individual's personal taste and comfort: The Easy Grip Safety Air Gun or the Hand Comfort Button Gun.

 

You do NOT need hundreds of different nozzles. All air amplifying nozzles produce up to 25 times the compressed air consumed. Different nozzles have different outlet sizes and the more air used, the greater the force produced. Noise reduction up to 10 dbA is typical as well as reduced air consumption when compared to open jets and tubes.

By maintaining a reasonable choice of nozzles most valid applications can be addressed with our range.

  Air Gun Suppliers and compressed air gun:

Safety Air Gun Suppliers normally do not have very energy efficient nozzles and some may not even be safe. All air guns utilize energy efficient nozzles and meet OSHA guidelines for safety. Any compressed air gun from is safe to use, low in noise levels and energy efficient

 

High Flow Air Gun

High Flow Air Gun

Rs 2,500  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

BrandACE FLOW
Air Consumption60 SCFM
Nozzle Size1/2" NPT
Body MaterialCast Mazak
ColorSilver
Air Pressure70 - 100 psi
  • Used widely for Blow-off of dust, dirt, oil, etc. from shop floors, machine working areas, deep holes, crevices, geometric patterns and any hard to reach places. 
  • They have an ergonomic design with better operator control thru operating lever.
  • They are available with up to 1 meter long extension pipes and can be fitted with our cone nozzles or Air Mag Nozzles. 


Additional Information:

  • Production Capacity: 100 nos. per month
  • Delivery Time: Ex-stock
  • Packaging Details: Corrugated Box.

View Complete details

get quoterequest a call back
  • Hand Vacuum Gun
  • Hand Vacuum Gun
  • Hand Vacuum Gun
Hand Vacuum Gun

Hand Vacuum Gun

Rs 2,500  / UnitGet Best Price
Air Consumption10 - 11 (cfm)
Nozzle Size32mm
Body MaterialZinc Die Cast
ColorBlack
Air Pressure70 - 100 psi
Product TypeVacuum cleaning and Air Blowgun
BrandACE FLOW
The Hand Vacuum Gun is the low cost solution to a variety of industrial housekeeping applications. It is a blow gun, a vacuum gun, a collection system and a transfer system in one simple package. The hand vac is light weight die cast aluminum and uses less air than a normal blow gun. The amplified air flow is approximately 12 times the air consumption. It draws a vacuum at one end to produce a high vacuum for collection or transfer of materials. It is easily converted from a blow gun into a vacuum gun and back again. In blow off mode, the 1-1/4 (32 mm) diameter allows it to cover a much greater area than a small blow gun for faster cleaning and drying. It can also be used to transfer material over a long distance using a vacuum hose which can be supplied. In vacuum mode, it can be used to vacuum up debris if more appropriate than blowing air, and debris can be collected in an available reusable vacuum bag.

  • Model 36011:Collection System consists of hand vac plus reusable collection bag, cleaning brush, crevice tool, skimmer tool, two extension wands, and stainless steel hose clamp.
  • Model 36012: Transfer System consists of hand vac plus 10 foot (3 m) vacuum hose with cuffs at both ends, cleaning brush, crevice tool, skimmer tool, two extension wands, and stainless steel hose clamp.
  • Model 36013: All Purpose System consists of hand vac plus 10 foot
  • (3 m) vacuum hose with cuffs at both ends, reusable collection bag, cleaning brush, crevice tool, skimmer tool, two extension wands, and stainless steel hose clamp.


Additional Information:

  • Production Capacity: 10 Nos per month.
  • Delivery Time: Ex-stock or within 2 weeks.
  • Packaging Details: Corrugated Box.

View Complete details

get quoterequest a call back
  • Push Button Type Air Blow Guns
  • Push Button Type Air Blow Guns
Push Button Type Air Blow Guns

Push Button Type Air Blow Guns

Rs 300  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Model Name/NumberAFK-BG01
BrandACE FLOW
Air ConsumptionUp to 4 SCFM
Nozzle SizeDifferent Nozzles available
Body MaterialAluminum
ColorSilver
Air Pressure70 - 100 psi
MaterialAluminum and Brass
Air Inlet1/4" NPT
MediaAir
Air Blow Guns Tools are machined from solid Aluminium bar-stock with all other parts of Brass. Due to its ergonomic design the air blowguns easily fits in the palm of the operator's hand. Even continuous operation does not cause any fatigue to the operator. Application of Air Blowguns For blowing off dirt, dust, oil etc. from shop floor, surfaces, machine working area, deep holes, crevices, geometric patterns, etc. and any hard to reach places.While a 3mm standard nozzle is part of the guns we can instead provide any of the Nozzles described in portion of this catalog ahead at an extra cost.

Other Details:
  • Operating Condition of Air Blowguns Clean dry Air at 2Kg / Cm2 to 8Kg / Cm2

Material of construction of Air Blowguns:
  • Body: Bar Stock Aluminium.
  • Nozzle, Plunger and Nut: Brass
  • Seals and 'O' Ring: Nitrile Rubber ( Viton can be made availabe for special cases, at extra cost)


Additional Information:

  • Production Capacity: 400 Nos. per month.
  • Delivery Time: Ex-stock
  • Packaging Details: Corrugated or paper box.

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES