Andheri East, Mumbai, Maharashtra
GST No. 27AAHCK5440N1Z4
Call 08048964879 88% Response Rate
Brand | ACE FLOW |
Color | Black |
Design | Standard |
Material | Aluminium |
Operating Medium | Compressed Air |
Operating Pressure | 6 Bar |
Hardened Air Knife, already used extensively for replacing rows of nozzles or jets or drilled pipe to reduce energy is now available with a special hard coated surface over its aluminum body for mildly corrosive environments and to address any abrasive contact to the surface. Priced only slightly above the price of regular anodized aluminum Air Flow Knives these units can sometimes eliminate the need to go to more costly and heavy stainless steel units and save hundreds of dollars in cost! As with the regular anodized aluminum units, the new Hardened Air Knife comes complete with a stainless steel shim to set the air gap (most others use cheap plastic which can wear out quickly) and are held together with stainless steel screws. Its Available in 2”, 3”, 6”, 9”, 12”, 18”, 24”, 30”, 36”, 42”, 48” and 54” lengths as standard they can also be coupled together using a coupling kit for longer spans.The Air Knife has proven to be of high quality, high performance and one of the most quiet, if not “the most quiet” designs on the market for all types of blow-off and cooling applications.
Air Knifes are a full flow design with rear port mounting to avoid interference with entrained air flow, optimizing air amplification and minimizing noise levels. It comes in three versions:
Specifications:
Additional Information:
View Complete details
Design | Standard |
Inlet Port | 1/4" NPT |
Size | 3" - 54" |
Operating Pressure | 6 Bar |
Colour | Gold Anodized |
Operating Medium | Compressed Air |
Country of Origin | Made in India |
The air knife provides increased efficiency and very low noise levels compared to the Standard air knife. Both units utilize the quality Haug static bars - the RN bar for most applications or the extra strong VS bars (Triple X versions) for very high static charges and extremely high speeds.
The Silent air knife ionizer uses a small amount of compressed air for a powerful, and adjustable force with "laminar" flow to eliminate charges in applications where static bars cannot reach or where high speeds are a factor.
Normally the Standard Model RN Haug brand static bar can address most applications. For extremely high speeds and high charges the extra powerful VS model is used. For wash-down applications (such as pharmaceutical areas), even a washable model is available at extra cost.
All Haug static bars come with a patented safety connector and fully shielded cable. The power supplies are "repairable" and are so well made, that we offer a two year warranty on them (one year on the bars).
View Complete details
Minimum Order Quantity: 1 Piece
Material | Aluminium and SS |
Color | Golden yellow |
Size | 2 in to 54 in |
Operating Medium | Compressed Air |
Operating Pressure | 6 Bar |
Air Knife - Air Curtains is easy to mount and maintain thereby reducing compressed air consumption and noise levels. It is the most efficient design for air knife curtain blow-off technology. This reduces noise levels and provides optimum blow-off energy. It produces a “laminar” flow of air using the Coanda effect. This draws a large volume of air from the surrounding area along with the small amount of compressed air from the Air Flow Blade. It also produces an output flow up to 40 times. The air knife system payback on compressed air savings can be seen in some applications. Air Knife - Air Curtains make up a full flow design with rear port mounting. This avoids interference in the entrained air flow. It also optimizes air amplification and minimizes noise levels. It is gold coated for longer life.
Additional Information:
View Complete details