ACE Flow Konzepts Private Limited

Additional Information:

• Production Capacity: 500 per month
• Delivery Time: Ex-stock
• Packaging Details: Plastic bag

• Model AIR-M104 (anodized aluminum)
• Model AIR-M104S (303/304 stainless steel)
• Model AIR-M104S-316L (316L stainless steel)

Features:

• Low maintenance
• Can withstand optimum temperature
• Easy to use

Additional Information:

• Production Capacity: 250 per month
• Delivery Time: Ex-Stock or within 2 weeks
• Packaging Details: Corrugated Box

• The 316L Stainless Steel Drum Angel Model 35011S includes the Drum Angel unit, crevice tool, heavy duty skimmer tool, floor tool, two (2) straight plastic wands, metal wand for sure with heavy duty skimmer tool, 10’ of plastic hose with cuffs and drum adaptor with plastic tube. OPTIONAL all 316L stainless drum adaptor and tool available on request at extra cost. Contact representative.

  Drum Pump and drum hand pump and barrel pump and electric drum pump:

  The Drum Angel is an effective drum or barrel pump and is a logical replacement for a breakable electric drum pump or a much slower drum hand pump.

  Automatic Drain Filter Separator:

  Automatic Drain Filter Separator is recommended with all products.

  Liquid Transfer Systems:

  Liquid Transfer Systems are usually electric systems with motors that can wear out or be easily damaged in wet and dirty environments. The stainless steel Drum Angel, with no electrical parts makes it a worry free solution

Air Knife Standard is easy to install and maintain. It can reduce both compressed air consumption and noise levels. It produces a “laminar” flow of air using the Coanda effect. This draws a large volume of air from the surrounding area along with the small amount of compressed air from the Air Flow Blade. It also produces an output flow up to 30 times. The air knife system payback on compressed air savings can be seen in some applications.

Features:

• The low cost Air Knives are rugged with a multiple port design for mounting flexibility. It is coated for longer life compared to competitive products that advertise a full flowing air knife type of system.
• It is made of a coated aluminum body and hard-coated cap. Stainless steel models are available for high temperature and corrosive applications.
• The multiple air inlet ports at the back ends in a compact design with additional mounting holes.
• Airflow amplification is approximately 30:1 compared to 3:1 for drilled pipe or open jets and tubes.
• There is instant on-off mechanism with no moving parts. There are no electricity or explosion hazards.

• It is built and designed for significantly longer life in difficult environments compared to competing products.
• There are flexible mounting options and can easily fit in small spaces.
• Energy reduction in compressed air can use up to 90% and noise reductions of 10 DBA.
• It is maintenance-free. The output is easily controlled and safe to use.

• In addition to water removal filters and oil removal filters, air knife accessories include extra shims and coupling kit for air flow blade Air Knives to join separate pieces.
• You can remove oil from a Compressed Air System utilizing the oil removal filter with automatic drain. This is the option if there is oil in the compressed air lines.
• Calculating Compressed Air Consumption for the Standard Air flow Blade is available in the chart provided. Likewise, calculate Air Savings as shown in the example.
• Remove Water, Dirt, and Rust From a compressed air system using water removal and oil removal filters with automatic drains.
• The Pressure Regulator adjusts the pressure in Air Knives to optimize flow and performance needed for production.

Additional Information:

• Production Capacity: 100 Nos. per month.
• Delivery Time: Ex-stock or within 1-2 Weeks
• Packaging Details: Corrugated Box

• Cabinet Panel Coolers NEMA Type 12 (IP-54) For Electronic Control Panels for General use in industrial environments where no direct liquid spray is applied to the unit. Stainless steel construction to hold up in corrosive environments.

• Cabinet Panel Coolers NEMA Type 3R (IP-14) For Electronic Control Panels for Outdoor Use. Stainless steel to hold up to rain, snow, humidity and general outdoor use.

• Panel Coolers NEMA Type 4-4X (IP-66) For Electronic Control Panels - splash resistant, for use in wash down environments as well as outdoor use. Unique patent pending design for secure water tight protection. Stainless steel for food service and corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use.

Cabinet Enclosure Cooler ( Panel Coolers Air Conditioner) - All Metal Parts, Stainless Steel Body, Quiet - Under 70dBA, Tests Show Constantly Quieter Than Competition!

Cabinet Enclosure Cooler ( Panel Coolers )- Operation Filtered, compressed air enters the cabinet enclosure cooler and through the vortex tube component. The air is split into two streams, one hot and one cold.

The muffled hot air from the vortex tube is expelled through the top of the air conditioner. The cold air is directed into the enclosure through the cold air distribution hose. Hot air inside the enclosure rises and exits to atmosphere via the air exhaust at a slight positive pressure. The enclosure is both purged and cooled with clean air. No outside air enters the enclosure.

Cabinet Enclosure Cooler / Cooling (Panel Coolers Air Conditioner) - Advantages:

• Low in cost
• No CFC's
• Fast installation
• Stabilize enclosure temperature and humidity
• Virtually maintenance free (No Moving Parts)
• Mounts in a standard electrical knockout
• Stops heat damage and nuisance tripping
• Eliminates fans and filters
• Prevents dirt contamination by keeping enclosure at positive pressure
• Units applicable to all environments including high temperature to 200F

Additional Information:

• Production Capacity: 100 per month
• Delivery Time: 2-3 Weeks
• Packaging Details: Corrugated Box

Air Nozzles is the brass nozzle added to a copper tube. Machine builders can bend the copper tube and aim the nozzles to where ever it suits. The copper tube is simply press fit into the customer's system.

Air Nozzles Applications

• Part cleaning
• Chip removal
• Part drying
• Liquid blow off
• Part cooling
• Material conveying
• Part ejection
• Fiber conveying
• Air assist

• Durable and efficient
• High performance
• Reasonable rate

Model AIR-M173S – is the first product of the star profile air amplifying nozzle and has the best force/air consumption ratio known. Ideal when higher force required in blowoff applications.

Sound Level 77 dBA at 3 ft. (0,91m) at 80 psig (5.5 bar)

We offers Tool Cooling System, Stainless Steel Body, Quiet - Under 70dBA, Tests Show Tool coolers Constantly Quieter Than Competition! Tool Cooling System for dry machining applications - replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost. It is efficient and can improve dry machining operations and assist in spot cooling applications for a variety of industrial machining processes but increasing matching rates and extending tool life. Produces cold air at approximately 50 F (28C) below supply air temperature. The unit is muffled for quiet operation. No moving parts assures long life, maintenance free operation while extending tool life and improving production rates. Can often replace costly mist coolants and certainly improves the quality and output of all types of dry machining operations from metals to plastics. Unit is low cost, no electricity with no moving parts and is essentially maintenance free.

Tool Cooling System - Advantages:

• No Moving Parts
• Quiet
• Driven By Air, NOT Electricity
• Small And Lightweight, Portable
• Milling, Drilling, Routing And Surface Grinding
• Low In Cost
• Superior Design And Performance
• Maintenance Free Operation
• Made Of Durable Stainless Steel And Metal Arts - NO Cheap Plastic Parts
• improves Production Rates And Finished Part Remains Dry
• Prevents Burning
• Improves Tolerance Control
• Eliminates Coolant Costs
• System Uses Strong Magnetic Base

• Always use clean, dry compressed air. A manual filter is supplied with every system to insure dry air. If oil is a major problem in the compressed air line, an oil removal filter is also recommended. The temperature of the air can be controlled by reducing the pressure using either a regulator or manual shut-off valve. A solenoid valve may also be connected into the machine operation to turn the air supply to the cooling unit on-off as it is needed, thereby conserving compressed air usage.

• Dry compressed air is easy to achieve utilizing a water removal filter with automatic drain and in the case of oil in the air lines, an oil removal filter with automatic drain. We recommend a 5 micron filter for water removal and a 0.03 micron filter for oil removal. These dry air filters will achieve the air quality required for any ACE FLOW blow off and cooling products.

Replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost.

• Sharpening Tools
• Routing
• Machining Plastics
• Drill And Cutter Grinding
• Milling, Drilling, Routing And Surface Grinding
• Plunge And Form Grinding
• Setting Hot Melt Adhesives
• Laser Cutting
• Tire And Rubber Grinding
• Band Saw Blade Cooling
• Chill Roll Nip Cooling

Additional Information:

• Production Capacity: 50 Nos. per month.
• Delivery Time: Ex-stock or within 2 weeks
• Packaging Details: Corrugated Box.

• Rugged bracket construction provides reinforcement of the pipe to maximize the vibrators area of influence
• Maximum surface area contact transmits the vibration energy directly through the pipe and into the material
• Clamping assembly allows easy relocation of vibrator to meet changing flow restrictions
• NAVCO specifies the correct vibrator size and type for optimal results

NAVCO's Saddle Mounts are available for any size pipe or chute and are proven in a broad range of applications. All units are shipped complete with safety cables/fasteners and are ready for installation when they arrive.

Additional Information:

• Production Capacity: 4 to 5 per month
• Delivery Time: With 2 weeks.
• Packaging Details: Corrugated or Wooden Boxes

Mini Spot Cooler is a low cost and maintenance free system which utilizes a vortex tube to produce cold air at one end. It is quiet and compact. Mini Spot Cooler - Mini Spot Cooler is designed for small parts and produces a stream of 15 to 20^°F (minus 9.5 to 7^°C) of cold air to prevent heat buildup depending on inlet air temperature. It can improve tolerances in maching of small critical parts and increase production rates. Cold air is directed using the flexible tubing. A magnetic base is standard for portability and easy mounting of the Mini Spot Cooler.

Mini Spot Cooler - Features:

• Needle cooling on sewing machines
• Cooling small blades
• Grinding lenses and small parts
• Cooling small tools
• No moving parts or electricity
• Compact and lightweight
• Low cost
• Maintenance free
• Instant cold air
• Quiet
• Magnetic base
• Interchangeable generators

• The ACE FLOW Mini Cooler is ideal for smaller spot cooling solution applications.

• Solder Cooling
• Adjusting thermostats
• Cool plastic machined parts
• Set hot melt adhesives
• Cool welding horns on ultrasonics
• Cool molded plastics
• Cool Electronic components
• Cool heat shrink tubing

• A safe and improved healthy condition in the workplace improves employee morale, increases worker productivity, decreases absenteeism and even reduces insurance costs in many cases. A cleaner environment can even enhance the performance of machinery and sometimes cut maintenance costs. The Dust Extractor is low cost solution to enhance the environment.

• This low cost, compact and portable unit operates utilizing a minimal amount of compressed air. It comes with a magnetic stand to “plug into position” on any magnet accepting metal surface. Simply connect the snap – on collection attachments and clamp a 2” hose on the opposite side, hook up your compressed air and you are set to go. Comes complete with shut-off valve and magnetic swivel base to position the unit any way you want. The air “gap” can be adjusted for a weak to strong vacuum.

Vibrating Tables are custom engineered to fit your specific application requirements. Our tables are available with several different drive options, depending on the power source available and the application requirements. Each table is designed with a vibration isolation system that allows the energy input to the material to be maximized while minimizing the vibration transmitted to the frame and supporting foundation. NAVCO is extremely experienced at seamlessly integrating custom vibratory tables into existing processes and providing the controls needed to maintain precise control of your vibrating table.Vibrating tables have been successfully utilized in a diverse set of applications through a wide range of industries.

Including:

• Densification of bulk materials
• Vibration or fatigue testing
• Shakeouts
• Unloading materials

In many industries, including:

• Aerospace
• Aggregate
• Cement
• Chemical
• Consumer products
• Food processing
• Plastic
• Steel

• Reduction of shipping costs resulting from increased container weight, smaller container sizes, and consistent container weights
• Low maintenance and operation costs thanks to NAVCO’s experience and proven reliability in vibrating tables

• Grid Tops
• Powered Roller Grid Tops
• Load Cells
• Jolt Tables
• Low Profiles
• Scale Frames
• Container Retaining Fixtures
• Special Construction Materials

• Minimal maintenance
• Longer functional life
• Unmatched quality

The unique Airmasters Rigid Flex Hose is an all stainless steel hose that does not break after a few bends like competitive rubber hoses with simple copper inserts. It is resistant to creep and crimping. The Airmasters Rigid Flex Hose is used to flex, direct and then hold in place air nozzles, air jets and other small blow off products. May also be used for liquid spray jets. Its all stainless steel construction allows its use in any difficult environment. The rigid flex hose is available in three different sizes – 6", 12" and 18" and in two configurations - 1/4" male NPT welded end connection both ends or 1/4 male NPT welded connection one end and female NPT welded connection other end.